咨询热线:

13266109887(欧生)

13291830844(刘生)

CNC加工新闻

news

联系我们 contact us

电话:0769-82682256

Q Q:277082221

联系人:13266109887/欧先生

13291830844/徐先生

邮件:wuason@cnc3.cn

地址:东莞市 厚街镇涌口社区国泰路易通科技园7号楼

您当前的位置:首页>CNC加工新闻>行业动态
高密度 海绵车床加工注意事项
发布者:  发布于:2019/11/5 9:15:36
高密度 海绵车床加工注意事项

Abstract : Sponge is a very soft material, which is a molding product, easy to be deformed, given slight pressure. If the lathe is
processed again, it is difficult to ensure that the sponge will not be deformed in the process of processing, thus ensuring its size. For
the cutting of sponge, there is no reference to obtain in books and actual work. In the process of machining, after many trials, the
special tool for sponge is designed, and the suitable cutting parameters are adjusted. Finally, the cutting of sponge with large thick­
ness on the lathe is realized, which ensures the successful completion of the machining task. At the same time, it also provides the
method and reference for cutting sponge in the future.
1.海绵加工分析
2.工艺分析及制定
3.刀具的解决方案
4.加工历程
工件及刀具装好后,如图5所示,选择低速运行主轴,不成以赶过每分钟150转,走刀量每转0.2mm。先将车 刀沿海绵外径大年夜于囟1000mm,概略囟120mm出上刀,直接划人80mm深,然猬缩 后退刀测量尺寸。测量尺寸后,遵循测 量值操纵中拖板刻度,划割外圆及内孔,退开尾座,取下工件,经测量囟60及囟100的两端面维度大约在0.2mm以内,表面很是滑润,没有接刀陈迹,工件加工完成。

友情链接:    炸金花-首页   真人麻将游戏   四人斗地主-安全棋牌   ko电玩城_官网_Welcome   边锋游戏-首页